|
 |
 |
Access map |
|
|
|
| [Access Map] |
 |
|
| address |
Dept. of Precision Science & Technology
Research Center for Ultra Precision Science and Technology
2-1, Yamadaoka, Suita, Osaka 565-0871, Japan
M1-324
TEL +81-6-6879-7300
FAX +81-6-6879-7301
E-mail 21coe@upst.eng.osaka-u.ac.jp |
|
|
|
|
 |
|
| Access |
| From "JR Ibaraki Station",board a Kintetsu
Bus to "Handai Honbu-mae" (Administration Bureau Osaka University)
to get off at "Handai Honbu-mae". |
| From "Hankyu Ibarakishi Station",board a
Kintetsu Bus to "Handai Honbu-mae" (Administration Bureau
Osaka University) to get off at "Handai Honbu-mae". |
| From "Subway Senri-Chuo Station",board a
Hankyu Bus to"Handai Honbu-mae" (Administration Bureau Osaka
University) to get off at "Handai Honbu-mae" |
| Board a Osaka Monorail to get off at "Handai
Byoin-mae"15 min. by walking in the direction of East from
Kita Senri station. |
|
|
|
|
|
| Access from the Main Terminals and Airports |
From Shin-Osaka Station (Shin-Kansen):
Get off at Senri-Chuo Station on the Subway Midosuji Line, and take the
Osaka Monorail. (time required: about one hour) |
From Osaka Airport (Itami Airport -- domestic flights only):
Take the Osaka Monorail. (time required: about one hour). |
From Kansai International Airport (KIX):
Get off at JR Osaka Station, take the Subway Midosuji
Line bound for Senri-Chuo Station, and change to the Osaka
Monorail.
Get off at Namba Station on the Nankai Line, take the
Subway Midosuji Line , get off Senri-Chuo Station, and change to the Osaka
Monorail.(time required: about two hours)
|
|
|
|
 |
|
